Knowledge Base - Yealink CP930W - First Time Setup

The Yealink CP930W requires pairing with a W60B DECT base. Before connecting / powering up the CP930W, you should have already connected the W60B you intend to use, and allowed it to complete it's start up.

Connect the Yealink supplied power adapter (12V/1A) to the charging cradle and plug into an available outlet. Then place the CP930W conference phone on the charging base.

If the phone is already paired to an existing W60B within range, the CP930W will connect automatically when it starts up.

At his time you can connect the confernce phone to a PC using a Micro USB cable. The CP930W is capable of being an audio device for the PC to support PC based conference calling applications.

You can also insert a Micro SD into the slot to the left of the keypad for conference recording and other options as they become available.

If you need to pair the CP930W with a new base, or multiple bases, follow the procedure linked below "Pairing with a Base Station".